Abestorm 220 CFM Exhaust Fan with Dehumidistat User Manual

Abestorm

Abestorm 220 CFM Exhaust Fan with Dehumidistat

Abestorm Crawl Space NeatyFresh Max allows for the free circulation of air on the porch and under the house. High moisture levels in the crawl spaces can lead to the decay and rot of wooden pillars that support the house, floor, joists, and beam pillars.

Also, high humidity causes an increase in termite activity and the growth of fungi. Rust, which causes corrosion and leaks in metallic pipes, is also factored into the moisture level in your crawl space.

With our ventilation fan, radon gas from treated wood is expelled away. This gas and other odors can easily spread into the living room and cause discomfort.

The NeatyFresh Max fan uses a humidity switch to control the fan to commence operation. The fan starts operating when the recorded humidity surpasses the selected value.

INSTRUCTION

BEFORE INSTALLING THE PRODUCT, ENSURE THAT YOU GO THROUGH THIS DESCRIPTION. INSTRUCTIONS TO THIS EQUIPMENT MUST BE ADHERED TO. FAILURE TO DO SO CAN CAUSE HARM.

DESCRIPTION

Rust, which causes corrosion and leaks in metallic pipes, is also factored by the level of moisture in your crawl space. With our ventilation fan, radon gas from treated wood is expelled away.

This gas, together with other odors, can easily spread into the living room and cause discomfort. The NeatyFresh Max fan uses a humidity switch to control the fan to commence operation. The fan starts operating when the recorded humidity surpasses the selected value.

Note: To eliminate chances of having the fan disabled when outdoor temperatures fall below 35 degrees Fahrenheit, the crawl space ventilation feature pre-installed, and factory-installed thermostats. The fan will resume normal operations whenever the outdoor temperatures rise above 50 degrees Fahrenheit.

Parameter

Airflow: 220CFM
Max Current: 0.60A
Size: 18″ x 9″ x 2″
Dehumidification state: Humidity ranges from 20% to 80%
Power: 120V~50/60Hz
Thermostat: On at 50°F; OFF at 35°F
You can trim the minimum mounting plate to 14″ x6″

GENERAL INFORMATION

Before leaving the factory, each of the short building fans must go through a scrupulous electrical factory test to ensure that they are free from any malfunction. After making a purchase, thoroughly inspect the product for any damage once you open the carton.

If you notice any damage in a newly purchased product, notify your dealer and the shipping company immediately. After that, place a complaint to claim a new product or a refund.

SETUP

Only qualified technicians can install all Crawl Space ventilations by Abestorm. Ensure that you adhere to the specifications and the local codes that govern your area before installation.

In the absence of local codes, follow the up-to-date versions of the international electrical code and international residential codes. Incorrect installation or failure to conform to the instructions may expose you to harm or even lead to electric shock, fire, or personal injury.

Following the manufacturer’s instructions to the latter will reduce the risk posed by electrical equipment. For more information on the product or queries concerning the appliance, reach the manufacturer (company name).

Before installing or performing maintenance on the appliance. Also, ensure that it is unplugged from the power supply.

TOOLS REQUIRED

5/16-inch flat head or nut roller screwdriver.
Make use of a 5/16-inch masonry drill if mounting the unit on a foundation block or brick.
Grounding repository within a distance of 6 feet from the ventilation.

INSTALLATION

Location:

If the low-rise fan NeatyFresh Max is installed in the crawl space at the back of an existing foundation ventilation opening, it should be at a distance of not more than three feet from each corner.

Abestorm 220 CFM Exhaust Fan with Dehumidistat User Manual (1)

Note:

Install the fan in the climbing space. See to it that the motor and electrical control box face the climbing space.

Get rid of the coverings or existing doors on the building’s ventilation holes.
The low-rise fan should be placed above the building’s vent.
If you mount the unit on a brick or foundation block, mark the alignment on the corners of the metallic panel. Drill a 5/16-inch hole to attach the wall anchor to the vent’s opening. Finally, use four screws to fix the climbing NeatyFresh Max onto the wall.

MOUNTING PLATE TRIM DIMENSIONS

If adjustments are to be made on the mounting plate to create room for important openings, follow the outlined trimming procedure. To avoid damaging the power cord, take precautions when trimming the mounting plate. Abestorm 220 CFM Exhaust Fan with Dehumidistat User Manual (2)

WIRING DIAGRAM

Abestorm 220 CFM Exhaust Fan with Dehumidistat User Manual (3)

APPROPRIATE FOR TEMPERATURE RANGE

An Antifreeze thermostat

Note: Some models of the Abestorm low-rise fans have an in-built wired thermostat, which inhibits the operation of the fan when the outdoor temperatures fall below 35 degrees Fahrenheit.

Optimal operations will commence once the temperature rises to about 50 degrees Fahrenheit.

WARRANTY SERVICE PLAN

The warranty is a guarantee for you. Products from Abestorm are sold within 1 year from the manufacturing date. The products are free of manufacturing defects, both in the process and material. If any fault is found in the product, both in material and process, Abestorm will take full liability to solve the problems as per the warranty terms.

Whenever the appliance is unavailable, the service plan will take effect from the day the purchase was made.

The service plan can only be effected within 1 year after the date of purchase after which, it will be rendered null and void. If the defect occurs during this period, Abestorm will replace it with a new product or give a refund of the same.

The service plan cannot cover damage due to misuse and abuse of the product. Nor does it cover damage from water, physical damage, incorrect voltage input, and other reasons caused by the use of the appliance other than the intended purpose.

Collateral damage and indirect losses liable for normal wear damage such as scratches are not guaranteed herein.

For queries on information about our distributors and re-sellers, reach our customer service provider at sales@abestorm.com or call us at working hours (8:00 AM to 5:00 PM CPST), Monday to Friday.

IMPORTANT NOTICE: Keep the item’s packaging in case warranty service is required.

Abestorm Solutions INC.
Add: 8605 SANTA MONICA BLVD#79525 WEST HOLLYWOOD, California, 90069 USA
E-mail: sales@abestorm.com
website: www.abestorm.com

FAQs About Abestorm 220 CFM Exhaust Fan with Dehumidistat

Do exhaust fans in bathrooms eliminate humidity?

Maintaining low humidity levels in your home can be facilitated by the use of kitchen vent fans and bathroom exhaust fans. The purpose of these goods is to eliminate the extra moisture in the air, which is produced by activities like boiling water and taking showers.

Is ventilation improved by exhaust fans?

Airflow The Value of Exhaust Fans in Your House Mould in your home can be controlled by using an exhaust fan to discharge steam outside of your house. Additionally, exhaust fans keep your furniture and other possessions secure and in excellent shape.

Can you dehumidify with a fan?

Activate the fans in the ceiling. Preserving extra moisture requires maintaining air movement. Utilizing air-moving equipment such as pedestal fans, ceiling fans, and others can significantly improve indoor air quality by drawing off excess moisture. Examine the exhaust fans in your kitchen, bathroom, and attic.

Can you operate an exhaust fan nonstop?

It is advised to run the fan constantly, around the clock. The fan can be adjusted to run at a slower, quieter speed by leaving it running constantly.

What is an exhaust fan used for?

The air inside your home is more breathable thanks to exhaust fans’ rapid removal of smoke and other odors. Exhaust fans promote circulation and eliminate surplus moisture, which enhances your indoor comfort.

Why is an exhaust fan good?

Size and air flow capacity Your exhaust fan needs to be able to manage the entire air volume in the room to function properly. A large exhaust fan will be excessively noisy and uncomfortable for a tiny area, whereas an exhaust fan that is too small won’t be able to adequately ventilate a large space.

What drawbacks do exhaust fans have?

Cons Kitchen chimneys are more effective at eliminating smells, grease, and smoke than exhaust fans. Therefore, they might not be appropriate for large kitchens or intensive cooking. Grease accumulates on kitchen surfaces over time as a result of these fans’ tendency to be noisy and their inability to collect grease particles.

Can a bathroom exhaust fan dry it out?

These gadgets take out moisture from bathrooms to get rid of mold and mildew in your space. Significant damage can result from vapor released into the air by hot water taps and showers. The steam in the air is eliminated by inline exhaust blowers, leaving you with dry, clean air.

What takes up humidity?

Employ a dehumidifier with rock salt. Rock salt takes in moisture from the atmosphere due to its hygroscopic nature. If your goal is to reduce the humidity in a wet basement, start by creating a rock salt dehumidifier out of a 50-pound bag of sodium chloride. Most big box hardware stores carry these.

Can humidity be raised by a fan?

The fan moves the moisture in the air; it does not elevate or reduce it. As previously indicated, a high-velocity fan can extract moisture from wet wood; however, in the absence of a dehumidifier, the air may get so saturated that the humidity is reabsorbed by the building material.

For More Manuals by Abestorm, Visit the Latest Manual

Abestorm 220 CFM Exhaust Fan with Dehumidistat User Manual [pdf]