Adler Europe AD7425 Electric Blanket Underlay User Manual

Adler Europe

Adler Europe AD7425 Electric Blanket Underlay

Adler Europe AD7425 Electric Blanket Underlay

About Adler Europe

The three contemporary brands comprising the Adler Europe Group are MESKO Home, CAMRY Premium, and ADLER Europe. We have earned the trust of hundreds of thousands of customers as one of the top players in the Central European home appliance market.

Having been in business for over 30 years, Adler Europe Group has a solid reputation in the industry. Since its establishment, Adler has built a solid reputation for providing high-caliber, inventive, and useful items that satisfy global consumers.

As producers of home appliances, we place a high value on the caliber of our output. Every production stage is subjected to strict quality control methods to guarantee that every product is produced to the highest standards.

Millions of European clients value the high-quality items that Adler Europe provides at reasonable prices. Since its introduction to the Polish market in 2002, the brand has grown in popularity due to its selection of home appliances.

IMPORTANT INSTRUCTIONS

PLEASE READ CAREFULLY. IMPORTANT INSTRUCTIONS, KEEP FOR LATER USE.

  1. Read the operating manual before using the device and follow the instructions contained in it. The manufacturer is not liable for damage caused by using the device against its intended use or improper handling.
  2. The device is for domestic use only. Do not use it for other purposes that are not by its intended use.
  3. Connect the device only to a 230 V ~ 50/60Hz. To increase the safety of use, do not switch on many electrical devices simultaneously to one circuit.
  4. Be extra cautious when using the device when children are nearby. Do not allow children to play with the device, do not let children or persons not familiar with the device use it. The equipment should not be used by young children, unless the controllers have been pre-set by parents or guardians, or children have been thoroughly instructed on how to safely handle the regulators.
    Children under three years of age cannot use this device due to the lack of response to overheating.
  5. WARNING: This equipment may be used by children over 8 years of age persons with limited physical, sensory, or mental abilities, or persons who have no experience or knowledge of the equipment, if this is done under the supervision of a person responsible for their safety or given to them. tips on the safe use of the device and are aware of the dangers associated with its use. Children should not play with the equipment. Cleaning and maintenance of the device should not be performed by children unless they are over 8 years of age and are supervised. This device cannot be used by people who are not heat sensitive, people who are very sensitive to heat, who are unable to respond to overheating, and people who require constant care.
  6. Always after use, remove the plug from the socket by holding the socket with your hand. DO NOT pull on the power cord.
  7. Do not immerse the cable, plug, and the entire device in water or other liquid. Do not expose the device to atmospheric conditions (rain, sun, etc.), or do not use it in conditions of high humidity (bathrooms, damp camping houses).
  8. Periodically check the condition of the power cord. If the power cord is damaged, it should be replaced by a specialist repair facility to avoid a hazard.
  9. Do not use the device with a damaged power cord or the device is not working properly.
    Do not repair the device yourself, as it may cause shock. Please return the defective device to the appropriate service center for inspection or repair. All repairs may only be carried out by authorized service points. Incorrectly performed repairs can cause danger to the user.
  10. Do not use the device near flammable materials.
  11. Do not leave the device or the adapter connected to the outlet unattended.
  12. To provide additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30 mA in the electrical circuit. In this regard, please contact an electrician.
  13. Do not allow the device or adapter to get wet. If the device falls into the water, immediately pull the plug or adapter from the power socket. Do not put your hands into water when the device is connected to the mains. Before re-use, it must be checked by a qualified electrician.
  14. Do not handle the device or adapter with wet hands.
  15. The device should be turned off every time you put it down.
  16. Do not use the device near water, for example: in the shower, in the bathtub, or above the basin with water.
  17. If the device uses a power supply, do not cover it, as it could lead to a dangerous increase in temperature and damage to the device. Always, first insert the plug into the power socket in the device and then the power supply to the mains socket.
  18. Do not use the bed sheet in folded condition. Do not put pins, needles, and other metal objects in the sheet.
  19. Do not use the sheet if it is wet. Leave the sheet hung loosely in a ventilated area until it is completely dry.
  20. Do not put the power cord on a warmed sheet. Do not fold the equipment when it is placed on top during storage. Check the equipment periodically for signs of wear or damage.
    If such signs or equipment are used improperly, please contact your supplier before continuing to use it.
  21. Store in a dry place. Never put heavy objects on the sheet.
  22. Never go to sleep with the electric sheet turned on. Unplug the power plug from the outlet.
  23. Never cover the controller.
  24. Before switching on the electric sheet, make sure that it is evenly distributed, there are no kinks or folds.
  25. The product can be washed in the washing machine at 30°C temperature. Can be washed by hand. Disconnect the power cord and controller before washing. Switch or controller – the regulator must not be wet during washing, and during drying the cord must be in a horizontal position to ensure that the water does not flow into the switch or controller – the regulator.
  26. Do not iron the electric sheet!
  27. This equipment is not intended for medical use in hospitals.
  28. The device should cool down before storage.
  29. The device may be used only with the types of removable elements specified in the equipment marking.
  30. Do not use the device on adjustable beds or if the device is used on an adjustable bed, check that the blanket and cord cannot get stuck or corrugated, eg on hinges.
  31. The device is equipped with a fuse protecting against overheating, which should not work when used by the intended use of the equipment. If the fuse trips, the device will stop working, and the equipment must be returned to the manufacturer or its representative for repair.

Product: Electric blanket underlay AD7425 / AD7426

SAFETY SYMBOLS

  1. Read the Instructions.
  2. Do not use folded or corrugated.
  3. Do not knock out pins, needles, or other objects.
  4. Do not use for very small children (0-3 years).
  5. Maximum washing temperature 30 ° C. Normal process.
    Adler Europe AD7425 Electric Blanket Underlay User Manual (2)

BEFORE FIRST USE

  1. The product needs to be unfolded and laid flat before switching on.
  2. Fix the product according to the instructions in the chapter: Fitting your product on the bed.
  3. We recommend that you switch your product to the maximum setting for two to three hours before bedtime then reduce to your desired heat setting 15 minutes before getting into bed. You must switch OFF before sleeping.

Fitting your product on the bed

Adler Europe AD7425 Electric Blanket Underlay User Manual (3)Adler Europe AD7425 Electric Blanket Underlay User Manual (4)

  1. Place the product onto the mattress with the controller (or two) at the HEAD END but towards the foot end of the bed.
  2. The control switches should be below the normal head’s sleeping position.
  3. Unroll the tie tapes and pass the tapes under the bed as shown in the diagrams (Fig.1-6).
  4. Ensure the heating wires do not extend under pillows or hang over the sides. Pass the middle tie tape under the mattress and through the middle loop on the opposite side (Fig.1). Pass the end of the tape under the corresponding bottom corner of the mattress (Fig. 2) up through the center loop of the product (Fig. 3) and down under opposite corner of the mattress and then through side loop on the opposite side of the product (Fig 4).
  5. Repeat this process at the other end (Fig. 5).

DESCRIPTION OF THE DEVICE

Mechanical Controller

Adler Europe AD7425 Electric Blanket Underlay User Manual (1)

  1. Temperature controller
  2. Power cord
  3. Bed sheet/blanket/mat
  4. Socket to disconnect the power cord before washing

OPERATING INSTRUCTIONS

Manual Controller

  • 1. Plug the power cord into an electrical outlet.
  • 2. Active the product by moving the switch to position 1/2/3.
  • 0 – switching off
  • 1 – low, gentle heat, LED on
  • 2 – medium heat, diode on
  • 3 – high heat, diode on
  • 3. Switch off the device that moves the switch to position 0.

STORING

Always allow the product to cool down before folding and storing. Your product can remain on the bed all year round as a comfortable under-blanket. Simply remove the controls and store them until Winter.

If you wish to remove the product from your bed when not in use, roll or fold it loosely and store it in a bag. Avoid creating sharp creases in the product; for example, do not store it under other items that may result in bending the inside heating wires.

CLEANING & AIR DRYING

The product can be machine-washed because it is equipped with detachable controllers. Unplug and remove one or two power cords with controllers from socket (4) to disconnect the power cord before washing.

Fold and presoak the product for 15 minutes in a mild soap and lukewarm water solution. Ensure the water temperature is less than 30°C.

  • Wash on the delicate or gentle cycle for 2 minutes.
  • Rinse in fresh lukewarm water.
  • Gently stretch the product to its original size.
  • Air dry over a clothesline. DO NOT use clothes pegs or clips of any kind.
  • Please DO NOT use the product until it is completely dry!
  • DO NOT iron the product!

TECHNICAL DATA

AD7425 / AD7426

  • Nominated power input: 60W / 2 x 60W
  • Supply voltage: 230 V ~ 50/60Hz
  • Dimensions (high x width) cm: 150X80 / 150X160

DISPOSAL

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins.

Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.

WWW.ADLEREUROPE.EU

FAQs About Adler Europe AD7425 Electric Blanket Underlay

When not in use, how should an electric blanket be stored?

Your blanket should not be treated with mothproofing chemicals or have heavy objects placed on top of it when not in use. Instead, store it according to the manufacturer’s recommendations. Even in the winter, it can be kept on the bed. Alternatively, it can be folded loosely and kept in a cool, dry spot.

Can an electric blanket be laundered?

As long as the care tab on your electric blanket says it’s safe, you can machine-wash it. It might be necessary to wash an electric blanket with a gentle, brief cycle on a low-speed spin with the least amount of agitation and at a different water temperature than you would for a regular wash. The heating element may require particular caution.

How is an electric blanket checked?

How to examine objects for damage. To inspect the heating elements for damage, place the blanket flat, turn it on to its highest setting for 15 minutes, keep a close eye on it, and then switch it off. Feel for any hot patches by running your hand over the blanket. A hot spot indicates kinking or damage to the heating element.

How does blanket mode work?

Program Blanket: Large-scale laundry, including sheets and blankets for beds.

What is an electric blanket with comfort control?

You may take total control over your warmth and comfort with the help of Silentnight’s Comfort Control Electric Blanket. The electric blanket is composed of 100% polyester, which adds comfort and durability while remaining gentle to the touch.

How may the odor of an electric blanket be eliminated?

How to Get Rid of Odours and Problem Stains from an Electric Blanket
Pour equal amounts of water and distilled white vinegar into a little spray bottle. Before washing, thoroughly spray the solution over the dirty areas and let it sit for a few minutes.

How can stains be taken out of an electric blanket?

Hand Sanitisation: Fill a bathtub or large sink with lukewarm water and a small amount of mild detergent if your blanket is older or the label suggests hand washing. To get rid of stains and grime, give the blanket a gentle swirl. Steer clear of rigorous cleaning as this could harm the wiring.

How can I prevent the slipping of my electric blanket?

The Use of Mattress Toppers: Over the electric blanket, use a mattress topper that is non-slip. The topper provides an additional layer of cushioning for comfort in addition to holding the blanket in place. Covering with a Tight-Fitting Sheet: Using a tight-fitting sheet to cover the electric blanket is another efficient technique.

Is it possible to use an electric blanket on both sides?

When you share a bed with someone who has different sleeping temperatures than you, an electric blanket with dual controls allows you to individually heat or cool each side of the blanket.

Can a heated blanket with wires inside be washed?

It is possible to wash a heated blanket that has wires. However, before washing your blanket, you must unplug its power cord (which plugs into the wall). Verify the care tag to see if your blanket is machine washable if the power connection isn’t detachable.

For More Manuals by Adler Europe, Visit the Latest Manual

Adler Europe AD7425 Electric Blanket Underlay User Manual [pdf]

Leave a Reply