Allen Roth 2027VA-30-201 White Undermount Single Sink Bathroom Vanity Installation Guide

Allen Roth 2027VA-30-201 White Undermount Single Sink Bathroom Vanity

About Allen Roth

A well-known name in home furnishings, Allen Roth is known for producing elegant and premium furniture, lighting, and accessories. The company was established in 2009 and sells its products only online and in-person at Lowe’s Home Improvement locations.

Modern, contemporary, traditional, and transitional are just a few of the styles and preferences that Allen Roth’s extensive product selection caters to. Their goods are renowned for their high caliber, meticulous attention to detail, and competitive pricing.

PACKAGE CONTENTS

HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE

Touch Up Pen Qty. 1 

SAFETY INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

WARNING

• Unpacking requires two adults and several steps are more easily handled with two adults.

CAUTION

• DO NOT try to pry off the top from the vanity, as damage to the top or vanity may occur.
• Follow these instructions closely, take your time, and use care while assembling this vanity

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

PREPARATION

Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry)

Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone caulk, power drill with drill bit

Helpful Tools (not included): Measuring tape, level

INSTALLATION INSTRUCTIONS

Note: Clean the area where the vanity (A) will be permanently located before beginning installation, ensuring the vanity (A) will not interfere with any water supply and drain lines once mounted.

1. With two people, carefully place vanity (A) with Top (B) against the wall in its final location. While holding the vanity base firmly against the wall, use the pre-assembled levelers on the bottom of each leg of the vanity (A) to level the item. Twisting the levelers counterclockwise will raise the height of the vanity (A), and twisting them clockwise will lower the vanity.
   • Once the vanity is in place, against the wall, and level from front to back and side to side, drill a hole through the vanity mounting area and into the wall studs (as illustrated in diagram 1). Using appropriate mounting hardware (not included), secure the vanity (A) to a wall stud. If possible, secure the vanity (A) to two wall studs for increased stability.
     WARNING Vanity (A) MUST be secured to the wall.
2. Apply silicone caulk (not included) to the unpolished side and bottom of the backsplash (C). Position backsplash (C) on top (B) and against the wall. Clean any excess caulk before allowing it to dry.
3. Insert the floor plumbing cutout lid (G) into the gap of the bottom panel to add more storage space if installing the plumbing from the gap of the back panel.
4. From the front of the assembly, insert shelf pins at the desired height, ensuring they are level. Place shelf (H) on top of shelf pins.
5. If you need to adjust the doors, do so in the following manner.
   • To adjust the door up or down, loosen screws (a) on both hinges, adjust the door, and retighten the screws.
   • To adjust the door left or right, turn screws (b) on both hinges, in or out.
   • To adjust the door in or out, loosen screws (c) on both hinges, adjust the door, and retighten the screws.

The assembly is now complete. Install desired faucet and drain assemblies (neither included) per the manufacturers’ instructions to complete the installation.

CARE AND MAINTENANCE

• Dust the vanity regularly with a soft, non-lint-producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The stone top can be cleaned using standard marble cleaning agents available at your local supplier.
• Tips for using a touch-up pen (AA): For scratches, stroke in the direction of the scratch. Rub off excess colorant promptly with a soft cloth.

IMPORTANT

• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble, engineered stone). Stone tops will vary from product to product. Use caution when placing items such as soap or any fragranced material on the stone surface. Use a soap dish, coaster, or similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with water and dry using a soft non-abrasive cloth.
  WARNING: Must use cleaning agents safe for stone. Check your cleaning agents’ use restrictions before using any stone. Damage to the stone may result. Vanity manufacturers are not responsible for damage caused by improper cleaning agents or soaps used. Warranty will not
  cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contains acetone, lemon, vinegar, or other acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your local home store. Follow the manufacturer’s directions on how to apply.

WARRANTY

The manufacturer warrants this item against defects in materials and workmanship for one (1) year from the date of the original retail purchase. This warranty applies only to the original purchaser.

This warranty does not apply to any damage to the product by accident, misuse, or modification, improper installation, or by affixing accessories not produced by the manufacturer. The manufacturer is not accountable whatsoever for product installation during the warranty period.

There is no further expressed warranty. The manufacturer shall not be legally responsible for incidental, consequential, or special damages arising at or in connection with product use or performance except as may otherwise be accorded by law. The manufacturer disclaims any implied warranties

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday

FAQs About Allen Roth 2027VA-30-201 White Undermount Single Sink Bathroom Vanity

For More Manuals by Allen Roth, Visit the Latest Manual

• Allen Roth 2 inch Cordless Faux Wood Blind User Guide
• Allen Roth Granite Kitchen Sink User Guide
• Allen Roth L1120H-WH Valdosta Ceiling Fan Instruction Manual
• Allen Roth CLL14CH Flush Mount Ceiling Fixture Instruction Manual

Allen Roth 2027VA-30-201 White Undermount Single Sink Bathroom Vanity Installation Guide [pdf]