Honeywell CL60PM Portable Evaporative Air Cooler User Manual

Honeywell

Honeywell CL60PM Portable Evaporative Air Cooler

Honeywell CL60PM Portable Evaporative Air Cooler

About Honeywell

We hold approximately 3,000 active and pending patents worldwide for our Honeywell Home products, and we continue to create dependable technology crafted for your comfort.

Our connected technology is based on 130 years of experience and the proven expertise of the Honeywell Home brand, a brand Resideo continues to offer today.

PARTS DESCRIPTION

Honeywell CL60PM Portable Evaporative Air Cooler User Manual (1)

  1. Water Inlet Hole
  2. Handle
  3. Left Side Grill
  4. Lever for Horizontal Louvers
  5. Water Tank
  6. Casters
  7. Louvers
  8. Water Level Indicator
  9. Control Panel
  10. Right Side Grill
  11. Water Inlet Valve
  12. Drain Plug
  13. Rear Grill
  14. Power Cord & Plug
  15. Rear Grill Screws
  16. Water Fill Door
  17. Honeycomb Cooling Media (Media is on 3 sides)

WARNING — READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY.

IN CASE THERE IS ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL PREVAIL.

WARNING: FOR OUTDOOR MODEL CO60PM (IN USA), USE ONLY ON GFCI-PROTECTED RECEPTACLES.

USE & OPERATION

CONTROL PANELHoneywell CL60PM Portable Evaporative Air Cooler User Manual (2)

FUNCTION BUTTONS

SPEED / ON-OFF

Connect to the power supply and turn the SPEED knob. The fan will start. Change the speed from 3 to 1 (1 for Low, 2 for Medium, and 3 for High fan speed). To switch OFF the unit, turn the SPEED knob to 0.

COOL

You must add water before operating the unit in Cool mode. Turn the COOL knob to the ON position to activate evaporative cooling.

The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.

SWING

Turn the SWING knob to the ON position to activate the movement of the louvers. The louvers will begin to move left to right automatically.

Vertical Air Flow – You can manually adjust the lever located at the front of the unit to change vertical air flow.

COOLER LOCATION

Make sure to position the air cooler correctly before you set up and start using the product. Please refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

FILLING WITH WATER

It is ideal to use the Continuous Water Supply Connection to run the unit for long periods without refilling the tank.

This also helps prevent pump failure in case the cooler is running with inadequate water in the tank.

CAUTION: Unplug the unit from the electrical power outlet before filling or emptying the water tank.

Continuous Water Supply Connection:

For a continuous water supply, you will need a garden hose that is connected to a main water supply.Honeywell CL60PM Portable Evaporative Air Cooler User Manual (3)

  • Locate the male connector at one end of the garden hose. Insert the garden hose connector into the water inlet valve of the cooler. Screw and tighten the water inlet valve onto the threaded part of the garden hose connector, making sure the hose connector is secured to ensure there will be no leaks. If there is leakage, the hose, and the water inlet valve may not be connected properly. Try to disconnect, replace, and tighten the water inlet valve again.
  • When the connection is secured, turn ON the water supply and the water will flow into the water tank of the cooler.
  • The cooler is now set so the water refills automatically when the water tank is empty, or when the water reaches below a minimum level.
  • When the water tank is full, the water inlet valve will automatically stop the water supply from overflowing.
  • Please open the water valve for a minimum flow as too much pressure could damage the inlet pressure control system.
    WARNING: The maximum water inlet pressure is 0.5 MPa.

Manual Water Tank Refill:

  • Using a portable container or a garden hose, you can refill the water tank manually by pouring water into the water tank through the water inlet hole located at the top of the air cooler.
  • Check the water level indicator to know when the water tank is full. Do not fill water above the “Max.” water level mark to avoid water droplets collecting on the louvers.

WARNING: Always ensure the water in the water tank is above the minimum (Min.) water level mark for both Continuous & Manual Water Refill.

Running the unit in Cool mode with inadequate water may cause pump failure.

WARNING: Do not fill water tank with dirty water or salt water. This can damage the unit and Honeycomb media.

NOTE: The water capacity refers to the total volume of water that can be contained within the air cooler water tank and water distribution system. The water capacity in the tank at the “Max.” indicator level may be lower than the actual water capacity of the air cooler.

CLEANING & DRAINING THE WATER TANK

If the cooler will not be used for a long period, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the separate Safety & Maintenance Guide.

WARNING:
Before cleaning the unit, switch the unit OFF and disconnect it from the electrical socket.

  • Move the unit to a location where the water can be drained. Remove the cap from the Drain plug located at the bottom of the unit. Allow the tank to empty.
  • Refill the water tank with clean water, up to the maximum level and drain it completely.
  • Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive elements or chemicals to clean this product.
  • When the product is not in use, store the unit in a dry place away from direct sunlight.

CLEANING THE HONEYCOMB COOLING MEDIA

  • The appliance is supplied with three Honeycomb Cooling Media pads.
  • The Honeycomb Cooling Media are located inside the Rear and Side Grills. Follow Steps 1 to 5 for instructions on how to remove them from the unit for cleaning and maintenance.
  • Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank and refill with fresh water, especially if the tank has not been cleaned in a long time.
  • The cleaning frequency for the Honeycomb media depends on local air and water conditions. In areas where the mineral content of water is high, mineral deposits may build up on the Honeycomb Cooling Media and restrict air flow. Draining the water tank and refilling with fresh water at least once a week will help reduce mineral deposits. If mineral deposits remain on the Honeycomb Cooling Media, the media should be removed and washed under fresh water. The media should be cleaned every two months or sooner, depending on your needs.
  • For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool function 15 minutes before turning the unit off.

Honeywell CL60PM Portable Evaporative Air Cooler User Manual (4)

Removing the Honeycomb Cooling Media:

  1. Remove the screws from the Rear Grill of the Air Cooler.
  2. Carefully pull out the Rear Grill from the Air Cooler.
  3. The Honeycomb Cooling Pad is secured on the Rear Grill by two Horizontal Bars that are fixed in place by two screws on the Left and Right Sides of these Horizontal Bars. Remove these screws to release the Horizontal Bars.
  4. Pull out the Honeycomb Cooling Pad by sliding it out from the Rear Grill. Replace with the new Honeycomb Cooling Pad by sliding into the grooves of the Rear Grill until it fits comfortably and securely in place on the grill. Replace the Horizontal Bars onto the Rear Grill by replacing the Left and Right Side screws and tightening them in place. This secures the Honeycomb Cooling Pad in place on the Rear Grill.
  5. Repeat steps 1 to 4 to remove the Honeycomb Cooling Pad on the Left and Right Side Grills.

WARNING: DO NOT operate the Air Cooler when any or all of the Rear or Side Grills are removed from the Air Cooler, or if there is a loose-fitting Rear or Side Grill. Doing so can cause serious injury or dangerous electrical shock.

TECHNICAL SPECIFICATIONS

Honeywell CL60PM Portable Evaporative Air Cooler User Manual (5)

ELECTRICAL WIRING DIAGRAM

For USA Outdoor Models Only. This appliance is equipped with a GFCI plug. Press the TEST button and then the RESET button once every month to ensure proper operation.Honeywell CL60PM Portable Evaporative Air Cooler User Manual (6)

Low water cut-off. Applicable for models with this feature only.

FAQS About Honeywell CL60PM Portable Evaporative Air Cooler

What is a portable evaporative air cooler?

A portable evaporative air cooler, also known as a swamp cooler, is a device that cools the air through the evaporation of water. It works by drawing warm air through water-saturated pads, which causes the water to evaporate and lower the air temperature.

How does the Honeywell CL60PM work?

The Honeywell CL60PM likely operates similarly to other evaporative air coolers. It draws in warm air from the surroundings, passes it through a set of wet cooling pads, and then expels cooled air into the room. The process of evaporation cools the air, providing relief from hot temperatures.

What is the cooling capacity of the Honeywell CL60PM?

The cooling capacity of the Honeywell CL60PM may vary depending on the specific model and settings. Generally, the cooling capacity is measured in CFM (Cubic Feet per Minute) and represents the amount of air that the unit can cool within a given time.

How large of an area can the Honeywell CL60PM cool?

The cooling area of the Honeywell CL60PM will depend on factors like the ambient temperature and humidity. Typically, manufacturers provide an approximate cooling area in square feet for their products.

Is the Honeywell CL60PM suitable for outdoor use?

Some portable evaporative coolers, including the Honeywell CL60PM, may be designed for outdoor use. However, it’s essential to check the product specifications and guidelines provided by the manufacturer to ensure that the unit is suitable for outdoor conditions.

How do I maintain the Honeywell CL60PM?

Maintenance requirements can vary from one model to another, but generally, you should regularly clean the cooling pads, water tank, and filters to ensure optimal performance and prevent the buildup of mineral deposits and bacteria.

Does the Honeywell CL60PM require a constant water supply?

Most portable evaporative air coolers, including the Honeywell CL60PM, come with a water tank that needs to be refilled periodically. Some models may also have the option for continuous water supply through a hose connection.

Can the Honeywell CL60PM be used as a humidifier in the winter?

Evaporative coolers can add some moisture to the air, but they are not designed to function primarily as humidifiers. In very dry climates, they may increase humidity slightly, but for significant humidification, dedicated humidifiers are more effective.

For More Manuals by Honeywell, Visit the Latest Manual

Honeywell CL60PM Portable Evaporative Air Cooler User Manual [pdf]
Tags: ,

Leave a Reply