Honeywell CO30XE Portable Evaporative Air Cooler
About Honeywell
We hold approximately 3,000 active and pending patents worldwide for our Honeywell Home products, and we continue to create dependable technology crafted for your comfort.
Our connected technology is based on 130 years of experience and the proven expertise of the Honeywell Home brand, a brand Resideo continues to offer today.
PARTS DESCRIPTION
- Control Panel
- Handle
- Louvers
- Water Tank
- Power Cord & Plug
- Casters
- Ice Compartment Lid
- Rear Grill
- Water Level Indicator
- Remote Control
- Detachable Water Tank Latch
- Water Fill Door
- Drain Plug
- Water Regulator
WARNING — READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY.
IN CASE THERE IS ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL PREVAIL.
USE & OPERATION
CONTROL PANEL
Icons on Display Screen
FUNCTION BUTTONS
POWER
Press the button to turn the unit on. The cooler will start automatically at medium speed. After a few seconds, the speed will switch to low. To turn the unit off, press the button again.
SPEED
Press the SPEED button repeatedly to change the speed between High – Medium – Low.
The indicator light will show the selected speed:
COOL
Press the COOL button until is illuminated on the display screen. This activates evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet. When the is not illuminated on the display screen, the unit switches to a fan-only mode, without evaporative cooling.
WARNING: Please ensure sufficient water is in the water tank otherwise you may hear a Low Water Alarm and the cooler will start in a Fan-only mode without evaporative cooling.
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has passed, the unit will automatically turn off (the unit remains in Standby mode until the power cord is unplugged from the electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING
Press the SWING button until is illuminated on the display screen. The louvers will begin to move left to right automatically. Vertical Air Flow – You can manually adjust the louvers to change the vertical air flow.
NATURAL
Press the NATURAL button until is illuminated on the display screen. The fan will randomly change between High, Medium, and Low speeds to mimic a natural breeze.
ROOM COOLING AND HUMIDIFYING
In cooling mode, Honeywell Air Coolers provide cool, moist air through the evaporation of water. There is a manual Water Regulator knob located in the ice compartment of the unit.
This allows you to adjust the amount of water pumped over the Honeycomb Cooling Media, thus helping to control cooling and humidification levels.
When the Water Regulator is set to MIN, the water pump distributes a minimal amount of water to the Honeycomb Cooling Media.
This results in less water evaporation and reduces the cooling effect. When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water to the Honeycomb Cooling Media. This results in maximum water evaporation and greater cooling performance.
REMOTE CONTROL
- POWER: ON / OFF
- SPEED: Low / Medium / High
- COOL: Controls cooling or fan option
- SWING: Controls the motion of the louvers
- TIMER: Controls the Timer function for automatic off
- NATURAL: Turns on Natural mode
Note:
- Do not mix old and new batteries.
- Do not recharge the battery.
- Exhausted batteries are to be removed from the product and safely disposed of as per local regulations.
- Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.
COOLER LOCATION
Make sure to position the air cooler correctly before you set up and start using the product. Please refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.
FILLING WITH WATER
CAUTION:
Unplug the unit from the electrical power outlet before emptying or refilling the water tank. Open the Water Fill Door located on the side of the unit.
The Water Level Indicator is located at the side of the unit. Refill the water tank when the water level is low. Do not fill water above the “Max.” water level mark to avoid water droplets collecting on the louvers.
Check the water level in the tank before running the COOL function. Make sure that the water in the tank is above the minimum water level mark. Running the unit in COOL mode with inadequate water may cause pump failure.
Note: The water capacity refers to the total volume of water that can be contained within the air cooler water tank and water distribution system.
The water capacity in the tank at the “Max.” indicator level may be lower than the actual water capacity of the air cooler.
Note: If ice is available, you may add ice in the top ice compartment to enhance the cooling performance.
WARNING: Do not fill water tank with dirty water or salt water. This can damage the unit and Honeycomb media.
LOW WATER ALARM
The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the minimum level, you will hear a beeping sound and the will flash continuously. The unit will automatically pause evaporative cooling.
Refill the water tank to deactivate the alarm in cooling mode. First, switch OFF the unit and unplug from the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and switch ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch the unit OFF and then ON again.
The Low Water Alarm will not activate in Fan-only mode. The Low Water Alarm will sound again if the COOL function is activated while the water tank is still empty.
CLEANING & DRAINING THE WATER TANK
Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used for a long period, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the separate Safety & Maintenance Guide.
WARNING:
Before cleaning the unit, switch the unit OFF and disconnect it from the electrical socket.
- Move the unit to a location where the water can be drained. Remove the cap from the Drain plug located at the bottom of the unit. Allow the tank to empty.
- Refill the water tank with clean water and drain it completely.
- Refill the water tank with clean water, up to the maximum level.
- Use a damp cloth to remove the dirt and dust from the surface of the unit. Never use corrosive elements or chemicals to clean this product.
- When the product is not in use, store the unit in a dry place out of direct sunlight.
CLEANING THE CARBON DUST FILTER* AND HONEYCOMB COOLING MEDIA
- The appliance is supplied with a Carbon Dust Filter* & Honeycomb Cooling Media.
- The Carbon Dust Filter* and Honeycomb Cooling Media are located inside the Rear Grill. See Figure 1 for instructions on how to remove them from the unit for cleaning and maintenance.
- Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank and refill with fresh water, especially if the tank has not been cleaned in a long time.
- The cleaning frequency for the Honeycomb media depends on local air and water conditions. In areas where the mineral content of water is high, mineral deposits may build up on the Honeycomb Cooling Media and restrict air flow. Draining the water tank and refilling with fresh water at least once a week will help reduce mineral deposits. If mineral deposits remain on the Honeycomb Cooling Media, the media should be removed and washed under fresh water. The media should be cleaned every two months or sooner, depending on your needs.
- For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool function 15 minutes before turning the unit off.
Removing the Carbon Dust Filter*/ Honeycomb Cooling Media:
- Remove all the screws from the Rear Grill of the Air Cooler.
- Carefully pull out the rear grill from the cooler.
- Slide out the Carbon Dust Filter* and clean it with water.
- The Honeycomb Cooling Media is secured on the Honeycomb Frame by a Horizontal Bar that is fixed in place by two screws. Remove these two screws to release the Horizontal Bar and slide the Honeycomb out of the frame.
- Replace or clean media with water and a damp cloth as needed.
WARNING: DO NOT operate the Air Cooler when the Rear Grill or Honeycomb Frame is removed from the Air Cooler, or if there is a loose-fitting Rear Grill or Honeycomb Frame. Doing so can cause serious injury or dangerous electrical shock.
TECHNICAL SPECIFICATIONS
ELECTRICAL WIRING DIAGRAM
For USA Outdoor Models Only. This appliance is equipped with a GFCI plug. Press the TEST button and then the RESET button once every month to ensure proper operation.
JMATEK North America LLC
- Mahwah, New Jersey 07495
- USA Phone: 1-800-474-2147
- Email: usinfo@jmatek.com
- Web: www.jmatek.com
FAQS About Honeywell CO30XE Portable Evaporative Air Cooler
Q: What is the Honeywell CO30XE Portable Evaporative Air Cooler?
A: The Honeywell CO30XE is a portable evaporative air cooler designed to provide cooling relief in hot and dry climates. It works by drawing in warm air, passing it through a cooling pad that absorbs moisture, and then blowing out cooler, humidified air. This process can help reduce the ambient temperature in the area it’s placed in, providing a refreshing and comfortable environment.
Q: How does the evaporative cooling process work?
A: Evaporative cooling is a natural process that occurs when water evaporates. The Honeywell CO30XE uses this principle by pulling warm air through a moistened cooling pad. As the air passes through the pad, the water evaporates, which lowers the temperature of the air. The cooler, humidified air is then blown out into the room, reducing the overall temperature.
Q: What is the cooling capacity and coverage area of the CO30XE air cooler?
A: The cooling capacity and coverage area of the Honeywell CO30XE air cooler can vary based on factors such as the ambient temperature and humidity levels. However, it is generally suitable for medium to large rooms and can provide effective cooling for areas of up to 320 square feet.
Q: Is the Honeywell CO30XE suitable for all climates?
A: The Honeywell CO30XE is most effective in hot and dry climates where the air is not already saturated with moisture. In such conditions, the evaporative cooling process can significantly reduce the temperature and improve comfort. However, in areas with high humidity levels, the cooling effect may be less noticeable or not as efficient.
Q: Does the Honeywell CO30XE require any installation?
A: No, the Honeywell CO30XE is a portable air cooler that does not require any permanent installation. It comes with castor wheels for easy mobility, and all you need to do is fill the water tank, plug it into a power source, and it’s ready to use.
Q: How do I maintain the Honeywell CO30XE air cooler?
A: Regular maintenance is essential to keep the air cooler functioning efficiently. Some maintenance tips include:
A. Cleaning the cooling pad and water tank regularly.
B. Changing the carbon/dust filter when it becomes dirty.
C. Draining the water tank when not in use for an extended period.
D. Storing the unit in a cool, dry place when not in use.
For More Manuals by Honeywell, Visit the Latest Manual
- Honeywell CO610PM Portable Evaporative Air Cooler User Guide
- HoneyWell TC10PE Portable Evaporative Air Cooler User Manual
- Honeywell TC09PEU Portable Evaporative Air Cooler User Manual
- Honeywell CO301PC Portable Evaporative Air Cooler User Manual
- Honeywell CS10XE Evaporative Air Cooler User Manual
|
Honeywell CO30XE Portable Evaporative Air Cooler User Manual [pdf] |
