Redmi Buds 4 Active Earbuds User Manual

Redmi

Redmi Buds 4 Active Earbuds

Redmi Buds 4 Active Earbuds About Redmi 

Xiaomi Corporation was established in April 2010 and went public on the Hong Kong Stock Exchange’s Main Board on July 9, 2018 (1810. HK).

With smartphones and smart hardware linked by an IoT platform at its heart, Xiaomi is a consumer electronics and smart hardware manufacturer.

In keeping with our mission to “Make friends with users and be the coolest company in the users’ hearts,” Xiaomi is always looking for new and creative ways to improve user experience, operational effectiveness, and quality.

The company never stops creating incredible items at fair costs so everyone can benefit from cutting-edge technology and live better lives.

OVERVIEW

Redmi Buds 4 Active Earbuds (11)

WHAT IS IN THE BOX

Redmi Buds 4 Active Earbuds (1) CHARGING PORT Redmi Buds 4 Active Earbuds (2) Redmi Buds 4 Active Earbuds (3)

INSTALLATION

Redmi Buds 4 Active Earbuds (4) Redmi Buds 4 Active Earbuds (5) Redmi Buds 4 Active Earbuds (6) Redmi Buds 4 Active Earbuds (7) Redmi Buds 4 Active Earbuds (8) Redmi Buds 4 Active Earbuds (9)

Force Pairing: Take out the earbuds from the charging box, put them on, and then triple-tap the left and right ear touch areas.

Restoring Factory Settings: within 30 seconds, press the touch areas on the left and right sides simultaneously five times (when the earbuds are not playing music or making calls). Once you hear a beep. the earbuds reset successfully and re-enter the Pairing Mode.

Turn On/Off Low Latency:

  1. put on the earbuds and long press and hold the left and ringing ear touch and a ready simultaneously for 1.5 seconds to turn on/off the Low Latency Mode.
  2. When the Low Latency Mode is enabled, put the earbuds into the charging box and close the lid to turn off the Low Latency Mode; If needed, you can press and hold the touch areas to enable this mode again.

Connecting with App

  1. Scan the QR code to download and install Xiaomi Earbuds to enable more features.
  2. Follow the instructions on the app to connect the earbuds.

Redmi Buds 4 Active Earbuds (10) Scan the QR code to download the Xiaomi Earbuds App.

Note: During the connection process, please make sure that the smartphone’s Bluetooth is enabled. Put the earbuds into the charging box, open the lid, and ensure that your smartphone is near the box.

Important Safety Information

  • Do not attempt to disassemble, repair, or modify the product, as this may cause fire or even completely damage the product.
  • Do not expose the product to environments with a temperature that is too low or too high (below 0°C or above 45°C).
  • Keep the product’s indicator away from the eyes of children and animals while the product is in use.
  • Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
  • Do not clean this product with alcohol or other volatile liquids.
  • Avoid any contact with liquids.
  • Do not disassemble, puncture, or crush the product nor expose it to fire.
  • Do not use the earbuds while driving, and comply with the relevant regulations in your region or country.
  • These earbuds and their accessories may contain small parts. Please keep them out of the reach of children.
  • Disposal of a battery into a fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
  • Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
  • A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
  • Product information and certification marks are located in the charging case.
  • Please stop using the product immediately and seek medical assistance if the contact area on your skin shows signs of redness or swelling.

Specifications

  • Name: Wireless Earphones
  • Model: M22321
  • Charging Port: Type-C
  • Earbuds Input: 5 V = 0.10A
  • Charging Case Input: 5 V = 0.50A
  • Charging Case Output: 5 V = 0.20A
  • Wireless Connectivity: Bluetooth® Low Energy 5.3
  • Operating Temperature: 0°C to 45°C
  • Supported Audio Codecs: SBC
  • Wireless Range: 10 m (open space without obstacles)

This product only supports certain Android or iOS systems. For detailed information, please check the product page on www.mi.com.

Note: Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.

WARRANTY NOTICE

As a Xiaomi consumer, you benefit under certain conditions from additional warranties. Xiaomi offers specific consumer warranty benefits which are in addition to, and not instead of, any legal warranties provided by your national consumer law. The duration and conditions related to the legal warranties are provided by respective local laws.

For more information about the consumer warranty benefits, please refer to Xiaomi’s official website https://www.mi.com/en/service/warranty/ Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase.

Under the consumer warranty, to the fullest extent permitted by law, Xiaomi will, at its discretion, repair, replace, or refund your product.

Normal wear and tear, force majeure, abuse,e or damage caused by the user’s negligence or fault are not warranted.

The contact person for the after-sale service may be any person in Xiaomi’s authorized service network, Xiaomi’s authorized distributors, or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.

Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.

Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.

Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points. Hereby, Tinlab Corporation declares that the radio equipment type M2232E1 complies with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners. For further information, please go to www.mi.com

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Tiinlab Corporation (a Mi Ecosystem company)

Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan District, Shenzhen, China

Importer: Beryko s.r.o. Pod Vinicemi 931/2, 301 00 Plzen www.beryko.cz

FAQs About Redmi Buds 4 Active Earbuds

Does noise cancelling come with the Redmi Buds 4 Active?

Redmi Buds 4 Active M2232E1 TWS Earphones (IPX4 Water Resistant, Fast Charging, Bass Black) with Environmental Noise Cancellation.

Is there a game mode on the Redmi Buds 4?

You may quickly and simply enter low-latency mode with Bluetooth® 5.3 to enjoy a smooth and accurate gaming experience. allowing you to accurately and efficiently handle the game and guaranteeing that you don’t miss any important moments.

Are the Redmi Buds 4 Wireless Charging Capable?

It is not compatible with wireless charging.

Does the Redmi Buds 4 have an option for transparency?

By default, the only way to switch between the ANC and Transparency modes is to touch and hold either earbud. Settings for ANC and transparency mode are exclusive to the Xiaomi Earbuds app.

Does transparency mode exist on the Redmi Buds 4 Active?

Xiaomi Redmi Buds 4 Wireless Earphones with Dual Transparency Modes and Hybrid Active Noise Cancelling White Bluetooth 5.2 in-ear headphones with 30 hours of playback for Android and iPhone with deep bass.

Redmi Buds 4 Are they worth it?

Conclusion. Indeed, the Redmi Buds 4 Active doesn’t have the highest sound quality available. However, the Redmi Buds 4 Active surpasses expectations in this price range since the bar is low. Indeed, they are superior to products in the true wireless earbuds (TWS) market from companies like Boult, Noise, PTron, and Boating.

What is the Redmi Buds 4 audio codec?

The Hi-Res Audio Wireless-certified Xiaomi Buds 4 Pro is compatible with Sony’s LDAC audio codec.

Which gadgets work with the Xiaomi Redmi Buds 4?

Compatible models are the Redmi Note 11 Pro, Redmi Note 11S, POCO F4 GT, Xiaomi 12 Pro, Xiaomi 12, Redmi Note 11 Pro 5G, and Redmi Note 11 Pro.

What is the Redmi Buds 4 IPX rating?

The earphones themselves—not the earbud charging case—are covered by the IP54 classification. It is not permitted to use your earbuds when bathing or taking a shower, so please avoid doing so near hot water.

What is the Redmi Buds 4 Active’s debut price?

The cost of the Redmi Buds 4 Active TWS earphones in India is Rs. 1,399 in the country. On Tuesday, the Redmi Buds 4 Active TWS earbuds were introduced in India. Along with several other innovations that improve audio quality, the wearable has a longer battery life than its predecessor.

For More Manuals by Redmi, Visit the Latest Manual

Redmi Buds 4 Active Earbuds User Manual [pdf]
Tags: , ,

Leave a Reply