Ekids B50 Bluetooth Headphones User Guide

Ekids B50 Bluetooth Headphones

About Ekids 

The leading producer of cutting-edge interactive electronic toys, educational tools, and actual electronics for children of all ages is eKids. Our extensive product selection, which includes toys licensed by Disney, Marvel, Nickelodeon, DreamWorks, Universal, Warner Brothers, Netflix, and other leading brands, is based on recognizable characters from a wide range of well-known films, television shows, and streaming services.

KIDdesigns, the parent company of eKids, was founded in 1988 and has won some of the most prestigious accolades in the business. Highlights include Mattel’s Licence of the Decade, The Toy Insider’s Top Holiday Toy, The Great American Toy Test’s “Top Toy” award, Family Fun’s “Toy of the Year” award, and the “Best New Product Innovation” award.

Introduction

Your new Bluetooth stereo headphones are designed to link with your Bluetooth-enabled smartphone or music player to allow you to wirelessly listen to music and answer phone calls within the normal 10-meter (33-foot) Bluetooth operating range.

Please review this manual carefully to make sure you are getting the maximum benefit from all of the features of your new headphones, and keep this manual for future reference.

What’s Included

The AUX jack allows you to use your Bluetooth headphones as normal headphones so that you can listen to music on any non-Bluetooth device that is equipped with a 3.5mm headphone jack.

Connect the included audio cable to the AUX jack on the right earcup of your headphones, and to the headphone jack of your auxiliary music source. Your headphones should be in the Power “Off” mode. Use the volume and track navigation controls on your music player as you would with any normal headphones.

PREPARATION FOR USE

Controls and Indicators

Charging Your Headphones

Your Bluetooth headphones operate on a built-in rechargeable battery. Although the battery was fully charged when it left our factory, the battery can lose power even during periods of non-use. Make sure to charge the battery before using the headphones for the first time.

To charge the battery connect the larger plug of the included USB charging cable to the powered USB port of a computer or a USB/AC adapter, and then connect the smaller plug to the USB charging port on the side of the right ear cup.

The Charging Indicator will glow red while the headphones are charging. The indicator will turn off when the headphones are fully charged and ready to use.

When fully charged the battery should provide up to 7 hours of talk time or music playing time at a normal listening level. If operated at maximum volume the music playing time will be reduced.

NOTE:

While charging, the headphone power will turn off to conserve battery power and minimize charging time.

OPERATING INSTRUCTIONS

1. First-Time Power On Auto Pairing
   The first time you power on the headphones, PRESS and HOLD the Play/Pause Button on the right earcup for about 3 seconds until the LED flashes. The first time the headphones are powered on they will enter auto-pairing mode, indicated by flashing red and blue LEDs.
   • Make sure Bluetooth is enabled on your device (check-in Settings or Options).
   • “ekids B50” will appear on your device’s Bluetooth menu.
   • Select “ekids B50” to complete the pairing.
     NOTE: If your Bluetooth device asks for a Password or a PIN to complete the pairing process, enter “0000” on the keypad of your device. You are now ready to begin streaming music wirelessly from your Bluetooth device to your Bluetooth headphones.
2. Standard Power On: Auto-Linking Mode
   After the first time, whenever you power on the headphones, the blue LED will flash slowly indicating that your headphones are in Auto-Linking Mode (trying to re-link to a previously paired device) that is within the normal pairing range of about 33 feet. If your headphones do not find a previously paired device that is in range and turned ‘on’ within 3 minutes, they will power OFF to extend the battery life.
3. Manually Pairing Your Headphones With Your Bluetooth Device
   NOTE: Your headphones must be ‘Off’’ to begin the manual pairing process.
   With the headphones in ‘Off’ mode, PRESS and HOLD the Play/Pause Button on the right earcup for about 8 seconds. After 3 seconds the LEDs will flash red and blue. Release the Play/Pause Button. Follow the a-c pairing instructions in Step 1 above to complete pairing.
4. Power Off
   To turn the headphones ‘Off’ at any time, PRESS and HOLD the Play/Pause Button on the right earcup for about 3 seconds. The red LED flashes three times and then the power shuts off.
5. Using Your Bluetooth Headphones
   The following chart explains the basic functions and operations of your Bluetooth headphones.

Functions

FCC/IC Information

This device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

Limited One-Year Warranty Information

eKids warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for one (1) year from the date of original purchase. Should this product fail to function satisfactorily, it is best to first return it to the store where it was originally purchased.

Should this fail to resolve the matter and service still be required because of any defect or malfunction during the warranty period, eKids will repair or, at its discretion, replace this product without charge.

This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.

If service is required, please call Customer Service at 1-888-TOP-TOYS to obtain a Return Authorization Number and shipping instructions. A copy of the sales receipt is required to validate in-warranty coverage.

Disclaimer of Warranty

NOTE:
This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products that have been damaged by negligence or willful actions, misuse, or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.

This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser. In no event will eKids or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members, or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary, or punitive damages.

(Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. Your acknowledgment and agreement to fully and completely abide by the above-mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier’s check, or credit card) for the purchase of your eKids product.

Distributed by eKids, LLC

For questions or comments please call our toll-free number:
1-888-TOP-TOYS
Also visit our website: www.ekids.com
1299 Main Street Rahway, NJ 07065

FAQS About Ekids B50 Bluetooth Headphones

For More Manuals by Ekids, Visit the Latest Manual

• Ekids JJ-M48 JoJo Siwa Fashion Headphones User Manual
• Altec Lansing MZX1003-BLK Whisper Headphones Quick Start Guide
• Altec Lansing LifeJacket 3 Bluetooth Speaker User Manual
• Altec Lansing LIFEJACKET XL Bluetooth Speaker Quick Start Guide

Ekids B50 Bluetooth Headphones User Guide [pdf]