Kenwood CHP80 Mini Chopper Grinder Instruction Manual

Kenwood CHP80 Mini Chopper Grinder

About Kenwood

Kitchen appliances from Kenwood, such as stand mixers, blenders, food processors, kettles, and toasters, are designed, manufactured, and sold.

Kenneth Maynard Wood established the business in 1947 at 79 Goldsworth Road in the town of Woking. The business relocated to Havant in 1962, where it is still located today.

Safety

• Read these instructions carefully and retain them for future reference.
• Before using it for the first time, remove all packaging and any labels including the plastic blade covers. Wash the parts: see ‘Cleaning’.
• If the plug or cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer to avoid a hazard.
• Always switch o the appliance and disconnect from the power supply, if it is left unattended, before assembling, disassembling or cleaning.
• When processing heavy loads such as meat do not operate continuously for longer than 15 seconds. Leave to cool for 2 minutes in between each 15-second operation.
• Do not exceed the maximum capacities stated in the processing guide (refer to illustration R – S ).
• Always wait for the blades to completely stop before removing the power unit from the bowl.
• Always remove the knife blade(s) before emptying or pouring contents from the bowl.
• Never use a damaged appliance. Get it checked or repaired: see ‘Service and customer care’.
• Never let the power unit, cord or plug get wet.
• Do not let excess cord hang over the edge of a table or worktop or touch hot surfaces.
• Do not operate the food chopper if the bowl is empty.
• Never operate the food chopper with the bowl filled with liquid.

Grinding Mill

• Dried Tumeric should not be ground alone, it should be processed with a minimum of 25g of ground/whole spices or other additional ingredients.
• Never fit the blade assembly to the power unit without the lid fitted.
• Never unscrew the lid while the mill is fitted to the power unit.
• Do not touch the sharp blades – Keep the blade assembly away from children.
• Never remove the mill until the blades have completely stopped.
• The appliance will not work if the mill is incorrectly fitted.
• Do not process hot ingredients in the mill allow them to cool down to room temperature before processing.

DESCRIPTION

1. Liquid Dripper
2. Chopper Lid
3. Finger Grip
4. Knife Blade
5. In Bowl Drive Shaft
6. Chopper Bowl
7. Grinding Mill Lid
8. Grinding Mill Blade
   Assembly
9. Cord Storage
10. Power Unit
11. Pulse Button
12. On/Off Button
13. Folding Spatula

To Use Your Chopper Bowl

Refer to Illustrations C – H

1. Place the power unit on a clean, flat surface.
2. Fit the chopper bowl onto the power unit, and turn it clockwise to lock it into place.
3. Fit the knife blade into the bowl over the in-bowl drive shaft.
4. Cut food into suitable-sized pieces and place into the bowl, refer to the recommended usage chart R – S.
5. Fit the chopper lid and turn the cit lockwise to lock.
6. Connect to the power supply, and press the On/Off button to switch on the appliance.
   • For short bursts of power press the pulse button.
7. Operate the chopper until the desired result is achieved.
8. To switch off the unit press the On/Off button. Unplug after use.
9. Reverse the above procedure to dismantle the unit.

Hints and Tips

• If the chopper labours, remove some of the mixture and continue processing in several batches, otherwise you may strain the motor.
• Chopping hard foods such as coffee beans, spices, chocolate or ice will wear the knife blades faster.
• Beware of over-processing some ingredients. Stop and check the consistency frequently.
• Some spices such as cloves, and cumin seeds can hurt the plastic of your food chopper.
• To ensure even processing, stop and scrape down the bowl.

To Use Your Grinding Mill

Refer to Illustrations I – M

1. Place your ingredients into the blade assembly.
2. Fit the lid and turn clockwise to lock.
3. Place the mill onto the power unit and turn clockwise to lock.
4. Press the On/Off button or use the pulse (P).

Liquid Dripper

Refer to Illustration N

• Please refer to the mayonnaise recipe in the recipe section for information on how to use the liquid dripper.

Cord Storage

Refer to Illustrations O

Storage

Refer to Illustrations P – Q

After use all parts can be stored together. Refer to illustration P for the correct order for storage.

Troubleshooting guide

Cleaning

Refer to Illustrations T

• Always switch on and unplug before cleaning.
• Do not immerse the power unit in water. Wipe with a damp cloth, then dry.
• Handle the blade with care – it is extremely sharp.
• Wash the parts by hand, then dry. Alternatively, they can be washed in your dishwasher.
• The parts are unsuitable for use in a Steam Steriliser. Instead, use a sterilising solution according to the sterilising solutions manufacturer’s instructions. Service and Customer Care

If you experience any problems with the operation of your appliance, before calling for assistance refer to the Troubleshooting guide or visit www.kenwoodworld.com.

If you need help with:

• Using your appliance or
• Servicing, spare parts or repairs (in or out of guarantee)
  Call Kenwood Customer Care on 0345 222 0458 or visit www.kenwoodworld.com. Have your model number (e.g. TYPE: CHP80) and date code (5-digit code e.g. 23T04) ready. They are located on the underside of the power unit.
• For spares and attachments call 0844 557 3653.
• Other countries
• If you experience any problems with the operation of
  your appliance, before requesting assistance refer to the “Troubleshooting guide” section in the manual or visit www.kenwoodworld.com.
• Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
• If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up-to-date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.
• Made in China.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT by THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or a dealer providing this service.

Kenwood Ltd
New Lane Havant Hampshire PO9 2NH
kenwoodworld.com
© Copyright 2023 Kenwood Limited. All rights reserved

FAQs About Kenwood CHP80 Mini Chopper Grinder

For More Manuals by Kenwood, Visit the Latest Manual

• Kenwood HMP50 650W Hand Mixer Instructions Manual
• Kenwood HMP50 650W Hand Mixer Instructions Manual
• Kenwood FDP65 Multipro Express Food Processor Instructions Manual
• Kenwood HDP406 Hand Blender Instruction Manual
• Elite Gourmet EPN-2976 2-in-1 Nonstick Panini Press Instruction Manual

Kenwood CHP80 Mini Chopper Grinder Instruction Manual [pdf]