Merkury Smart Wi-Fi Indoor Camera 1080P HD Pack
About Merkury
Merkury Innovations has dedicated itself to providing top-notch customer service since its founding. We accept that your happiness is a necessary condition for our success. taking accountability seriously.
Our committed staff of customer support representatives is always ready to help you with any queries or issues we are dedicated to resolving any problems you may have. swiftly and expertly.
START GUIDE
What’s in the Box
- Smart Wi-Fi Camera
- USB Cable
- Mounting Adhesive
- Power Adapter
- User Manual
Get Ready
- Know your Wi-Fi network and password
- Make sure your mobile device is running iOS® 9 or higher or Android™ 5.0 or higher
- Make sure you’re connecting to a 2.4GHz Wi-Fi network. (Geeni can’t connect to 5GHz networks)
- a microSD card can be used to save recorded footage but is not required.
STEP 1
- Download the Geeni App from App Store or Google Play.
- Register an account on your Geeni App.
- Enter your mobile phone number or email address.
- Enter the verification code and create a password.
- Log in to the App.
STEP 2
- Plug-In
Plug the camera into the power source using the included USB cable. The indicator will remain solid red when starting up but will begin to blink red when connected. If it does not blink, please reset it. *see reset instructions on p. 4
STEP 3
- Add device: Easy Mode
- In the Geeni app, on the top corner of the Devices screen, click Choose “Wi-Fi Camera”.
- Make sure the light on the camera is blinking red, indicating the device is ready to connect, then press Next Step.
- Enter your Wi-Fi network and password.
- The Geeni app will attempt to connect. This may take a few moments. When the blinking light turned solid blue, the connection was successful!
NOTE: Geeni can’t connect to 5GHz networks.
If the connection fails, try to connect using QR Mode.
SETTINGS
- Access Camera Settings:
From your main device list, click on the camera you want to edit, then press the “ “ button on the top right for advanced settings. - Device Name:
- Press to rename your device to something like “Bedroom” or “Kids’ Room”.
- Device Sharing: let friends, spouses, roommates, or family keep an eye on what your cameras see. Whether it’s a baby’s crib or the family dog, you can decide who gets to check in, access the camera, and set notifications.
- Remove Device:
Delete the camera from your account. Until it’s deleted, it will always be linked to your account. - Indicator Light:
By default, the camera lights up to show it’s on. Switch the “Indicator Light” off to hide the light. - Flip:
If you mount your camera upside down, toggling the “Flip” function will rotate the image so that it’s right side up. - Time Watermark:
Turn the time watermark on to always see a timestamp of when the video is taking place. - Motion Detection:
When turned on, you’ll receive notifications to your phone whenever the camera senses motion. Press to turn Motion Detection off or set how sensitive you want it to be. - Format SD Card:
Press to erase your Micro SD Card.
VOICE CONTROL GUIDE
Thank you for purchasing your MERKURY smart home product. Make sure your devices are already set up using the Geeni app, then follow these steps. Your video device is able to stream video to these leading smart assistants.
- Open the Google Home app and go to Home Control in the menu.
- Tap the “+“ button
- Choose “Geeni“ from the list of Home Control partners.
- Authorize your account with Google Assistant using the username and password from your Geeni app.
- At any time, go into the “Home Control“ section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni app, and Google Assistant will refer to them by the same name.
- Open the Alexa app and go to Skills in the menu.
- Search for Geeni then tap Enable.
- Authorize your account with Smart HomeSkills using the username and password from your Geeni app.
- Choose “Discover Devices.“ After a few seconds, MERKURY devices will be displayed under Smart Home in the Alexa app.
- You can rename your devices in the Geeni app, and Alexa will refer to them by the same name.
Frequently Asked Questions
- Can I share with family and friends?
Yes! You can share access to all Merkury devices— cameras, plugs, bulbs, doorbells, etc.— with family & friends. - Recording and Micro SD Card Usage:
Without a Micro SD card (optional, sold separately), the smart Wi-Fi camera can show live camera video, save screenshots or videos of the camera stream to your phone for later, and record still snapshots of motion alerts when notifications are turned on. - How many videos Can the Camera Record?
Depending on video quality, the camera will use around 1GB of storage per day, so a 32GB card can provide weeks of continuous video. As the card fills up, - How Many Devices Can I Control?
Geeni app can control an unlimited amount of devices in an unlimited amount of locations. - What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.
Troubleshooting
- Cannot connect to your Wi-Fi network.
Make sure you enter the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Reset the device
- The camera can be reset by holding down the reset button for 3-4 seconds.
System Requirements
- Mobile device running iOS® 9 or higher or Android™ 5.0 or
- higher
- Existing Wi-Fi Network
Technical Specifications
- Camera: up to 1080p (1920 x 1080) at 25 frames/sec. H.264 encoding
- Field of View: 115° diagonal
- Audio: Internal Speaker and Microphone
- Storage: supports up to 128 GB MicroSD card (not included)
- Wi-Fi is not compatible with 5GHz Wi-Fi networks.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Support:
If you encounter any issues, please get in touch with us at support.mygeeni.com for help.
(888) 232-3143 Toll-free
To explore our full selection of products, visit us at: www.mygeeni.com
© 2020 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006. The illustrated product and specifications may differ slightly from those supplied. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple, and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners.
Can’t connect? Need help?
DO NOT RETURN THIS PRODUCT TO THE STORE
support.mygeeni.com
(888)232-3143 Toll-free or tap ‘support‘ for help in the Geeni app.
FAQs About Merkury Smart Wi-Fi Indoor Camera 1080P HD Pack
Is the camera made by Merkury waterproof?
They are ideal for capturing lively and fast-paced scenes because of their small size and waterproof surface.
Is a subscription required for the Merkury camera?
Sometimes the detection may not know what is seen and will send out a notification without labeling it as “smart.” You need to be enrolled in a Plus or Premium subscription plan for Smart Detection to function.
Does a Merkury camera require a plug to operate?
There is no battery included with the camera. For it to function, an outlet must be plugged in.
How is recording done with a Merkury camera?
In the toolbar at the bottom, tap the Record icon. By clicking this button, you can initiate the camera’s recording. Press the button once more to halt the recording; otherwise, it will end on its own after 20 seconds of recording time. The recording will subsequently be visible in your Activity list.
Merrily Innovations: What is it?
Merkury Innovations LLC offers accessories and equipment for electronics. The company sells electronic accessories in retail stores, including speakers, power banks and chargers, earphones, headphones, MP3 players, tablet cases, keyboards, tablet pens, and automobile mounts.
Which SD card is used by the Merkury camera?
A cloud membership is not necessary; all Merkury cameras contain a microSD card slot for local video storage.
Is Geeni compatible with iPhones?
iOS 11.0 or later is required. WatchOS 3.0 or later is required.
Are merkury lights able to sync with music?
You may design distinctive lighting shows to fit any occasion or mood with mixed color scenes. Your music comes to life with lights that pulse in time with the beat thanks to music sync and dance modes.
Is Geeni functional without WiFi?
No, Geeni won’t function since using Geeni items remotely requires a Wi-Fi connection.
A Merkury camera what is it?
This indoor 1080p HD camera is compatible with both Google Home and Alexa and has motion detection, night vision, two-way audio, and motion detection.
For More Manuals by Merkury, Visit the Latest Manual
- Merkury MI-CW055-199W Smart Wi-Fi Outdoor Camera User Guide
- Merkury Smart Wi-Fi Camera User Guide
- Merkury BW450 LED Lamp User Guide
- Merkury 8062 Sound Tower Pro LED Speaker User Manual
Merkury Smart Wi-Fi Indoor Camera 1080P HD Pack User Guide [pdf] |