Sigma 18-35mm HSM Lens Instruction Manual

Sigma 18-35mm HSM Lens

About Sigma

SIGMA produces digital cameras, interchangeable lenses, and other photography gear. Since its establishment in 1961, it has only manufactured products associated with photography and video. In other words, it is a company that only creates technology connected to photography.

The perfect tools for special, memorable occasions. Anywhere in the world, cutting-edge, previously unseen, and superior products and services are available. With these limitless ideals as its guiding principles, SIGMA seeks innovation and exploration with never-before-seen zeal and commitment.

DESCRIPTION OF THE PARTS

1. Filter Attachment Thread
2. Focus Ring
3. Distance Scale
4. Focus Index Line
5. Focus Mode Switch
6. Zoom Ring
7. Mount
8. Lens Hood

DC LENS

These are special lenses that are designated for digital cameras because the lens image circle is designated to correspond to the size of the image sensors of most digital SLR cameras.

The specialized design gives these lenses the ideal properties for digital cameras.

• An image sensor element larger than those corresponding to APS-C cannot be used in digital cameras or 35mm SLR cameras. If such an element is used vignetting will occur on the picture surface.
• If you use SD1 / SD1 Merrill digital camera, the corresponding angle of view will be 27-52.5mm.
• If you use SD15 / SD14 / SD10 / SD9 digital camera, the corresponding angle of view will be 30.6-59.5mm.

ATTACHING TO THE CAMERA BODY

Please refer to the camera’s instruction manual for details on how to attach it to or detach it from the camera body.

On the lens mount surface, there are several couplers and electrical contacts. Please keep them clean to ensure proper connection.

To avoid damaging the lens, be especially sure to place the lens with its front end down while changing the lens.

SETTING THE EXPOSURE MODE

The Sigma lens functions automatically after mounting to your camera. Please, refer to the camera instruction book.

FOCUSING AND ZOOMING

SIGMA AF and CANON AF

For autofocus operation, set the focus mode switch on the lens to the “AF” position (Fig. 2). If you wish to focus manually, set the focus mode switch on the lens to the “M” position. You can adjust the focus by turning the focus ring.

(NIKON AF, PENTAX AF and SONY)

For autofocus operation, set the camera to AF mode and set the focus mode switch on the lens to the “AF” position (Fig. 2).If you wish to focus manually, set the focus mode switch on the lens to the “M” position. You can adjust the focus by turning the focus ring.

• Please refer to the camera’s instruction manual for details on changing the camera’s focusing mode.
• For Nikon, Pentax, and Sony mounts, it is only possible to use AF with camera bodies that support motors driven by ultrasonic waves such as HSM. AF will not function if the camera body does not support this type of motor.
• This lens also permits manual focusing even in the autofocus mode. With the camera set to the One-Shot AF (AF-S) mode, it is possible to manually override the autofocus while the shutter release button is pressed halfway.
• When operating this lens in manual focus mode, it is recommended that the correct focus be confirmed visually in the viewfinder rather than relying on the distance scale. This is due to possible focus shifts resulting from extreme temperature changes which cause various components in the lens to expand and contract. Special allowance is made for this at the infinity setting.

Zooming

Rotate the Rubber grip on the zoom ring to the desired position.

LENS HOOD

A bayonet-type detachable hood is provided with the lens. This lens hood helps to prevent flare and ghost images caused by bright illumination from outside the picture area. Attach the hood and turn clockwise until it stops rotation. (fig.3)

• ŦIn order to place the lens and hood into the storage case, you must first remove the hood, then replace it on the lens in the reverse position. (fig.4).

FILTER

• Only one filter should be used at the time. Two or more filters and/or special thicker filters, like a polarizing filter, may cause vignetting.
• When using a polarizing filter with an AF camera, use the “circular” type.

BASIC CARE AND STORAGE

• Avoid any shocks or exposure to extreme high or low temperatures or humidity.
• For extended storage, choose a cool and dry place, preferably with good ventilation. To avoid damage to the lens coating, keep away from mothballs or naphthalene gas.
• Do not use thinner, benzine, or other organic cleaning agents to remove dirt or fingerprints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue.
• This lens benefits from a dust and splash-proof construction. Although this construction enables the lens to be used under light rain, it is not the same as being waterproof. Please pay attention to prevent a large amount of water from splashing on the lens, especially when using it on a waterside. It is often impractical to repair the internal mechanism, lens elements, and electric components if damaged by water.
• Sudden temperature changes may cause condensation or fog to appear on the surface of the lens. When entering a warm room from the cold outdoors, it is advisable to keep the lens in the case until the temperature of the lens approaches room temperature.

TECHNICAL SPECIFICATIONS

Dimensions and weight include the SIGMA mount.

CE

The CE Mark is a Directive conformity mark of the European Community (EC).

FCC Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules.

These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment causes harmful interference to radio or television reception, which can be terminated by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment.

The glass materials used in the lens do not contain environmentally hazardous lead and arsenic.

SIGMA CORPORATION 2-4-16 Kurigi, Asao-ku, Kawasaki-shi, Kanagawa 215-8530 Japan

Phone: (81) – 44 – 989 – 7437 Fax: (81) -44-989 – 7448

FAQS About Sigma 18-35mm HSM Lens

For More Manuals by Sigma, Visit the Latest Manual

• Sigma 150-600mm HSM Lens for Canon Instruction Manual
• Sigma 24-70mm Art Lens Instruction Manual
• Sigma 16mm Contemporary Lens Instruction Manual
• Fujifilm Fujinon XC50-230mm OIS II Lens Owner Manual
• Fujifilm Fujinon GF32-64mmF4 R LM WR Lens Owner Manual

Sigma 18-35mm HSM Lens Instruction Manual [pdf]