Soundcore Life P2 Wireless Earbuds User Manual

SoundCore

Soundcore Life P2 Wireless Earbuds

Soundcore Life P2 Wireless Earbuds

About SoundCore

Our daily pulse is the rhythm of progress. It gives us a sense of fulfillment and motivates us to put our all into whatever we do. It keeps us moving forward and makes every journey feel like the best it can be.

The goal of soundcore is to maintain this beat’s integrity throughout. As a result, we never stop improving and strive to make every day better than the last.

Charging

  • Remove the protective film from the earbuds when using for the first time.
  • Fully charge both the earbuds and the charging case before the first use.
  • To prevent damage, use the provided USB-C cable.
  • Fully dry off the earbuds and the USB port before charging.

Soundcore Life P2 Wireless Earbuds (1)LED behavior (Earbuds & Charging case)

Soundcore Life P2 Wireless Earbuds (12)

Powering On/Off

The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.

Soundcore Life P2 Wireless Earbuds (2)

LED behavior (Earbuds)Soundcore Life P2 Wireless Earbuds (3)

  • To manually power on, press the multi-function button on either one of the earbuds.
  • To manually power off, press and hold the multi-function button on either one of the earbuds for 3 seconds.

Pairing

True Wireless Stereo Connection The right earbud will automatically connect with the left earbud when taken out of the charging case.Soundcore Life P2 Wireless Earbuds (4)

LED behavior (Earbuds)

Soundcore Life P2 Wireless Earbuds (5)

  • When powered off, press and hold the multi-function button on both earbuds for 1 second, the earbuds will enter TWS connecting mode.
  • When powered on and connected, place either one of the earbuds into the charging case, you can keep using the other one.
  • When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
  • When you are on a call, place either one of the earbuds into the charging case, 3 to 5 seconds later, the microphone in the other earbud will be activated.

Bluetooth Pairing with Your Device

The earbuds will enter pairing mode when powered on. You are requested to confirm the connection when you see a pop-out screen.Soundcore Life P2 Wireless Earbuds (6)

LED behavior (Earbuds)

Soundcore Life P2 Wireless Earbuds (7)

In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair” or even no screen popped out. Don’t worry and it will not influence the use.

Once successfully paired, the primary earbud connects with your device and transfers the signal to the secondary earbud, the latter one will not connect with your device. As a result, the Bluetooth pairing list on your device may indicate that only one side is connected while the other is not.

Soundcore Life P2 Wireless Earbuds (8)

  • To pair with another Bluetooth device, first turn off Bluetooth on the currently connected device.
  • Each time you power your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.

Wearing

  1. Choose the ear tips that fit your ears the best.
  2. Insert the earbuds into the inner canal of your ears.
  3. Turn and find the most comfortable position.

Controls

Soundcore Life P2 Wireless Earbuds (9)

Soundcore Life P2 Wireless Earbuds (10)

Soundcore Life P2 Wireless Earbuds (11)

Reset

Reset the earbuds if the earbuds cannot connect properly or cannot connect with your device properly.

  1. Place the earbuds into the charging case and make sure they are being charged.
  2. Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3 times and then turn white. All the memory data will be cleared.

Specifications

Specifications are subject to change without notice.

  • Input 5 V 500 mA
  • Rated output power 7 mW @ 1% THD
  • Battery capacity 55 mA x 2 (earbuds); 700 mA (charging case)
  • Charging time 2 hours
  • Playtime (varies by volume level and content) 7 hours (Total 40 hours with the charging case)
  • Driver size 6 mm × 2
  • Frequency response 20 Hz – 20 kHz
  • Impedance 16 Ω
  • Bluetooth version V 5.0
  • Bluetooth frequency 2402-2480 MHz
  • Audio codec format SBC, AAC, aptX
  • Bluetooth range 10 m / 33 ft

Technical specifications

  • Compression ratio: 4:1
  • Word depth: Support 16bit and 24bit
  • Decoding delay: Sample rate 48kHz<2ms
  • Dynamic range: 16bit>92dB, 24bit>120dB
  • Data rates: 352kbps
  • Decode mode: Stereo

FAQS About Soundcore Life P2 Wireless Earbuds

Q: What are the Soundcore Life P2 Wireless Earbuds?

A: The Soundcore Life P2 Wireless Earbuds are a pair of true wireless earbuds manufactured by Anker, a well-known brand for mobile charging accessories and audio devices. These earbuds are designed to provide a wire-free and convenient listening experience for users, suitable for various activities like commuting, exercising, and more.

Q: How long does the battery last on the Soundcore Life P2 Wireless Earbuds?

A: The battery life of the Soundcore Life P2 Earbuds typically lasts around 7 hours on a single charge. Additionally, the charging case can provide multiple additional charges, extending the total playtime to around 40 hours before needing to recharge the case itself.

Q: Can I use the Soundcore Life P2 Earbuds for sports and workouts?

A: Yes, the Soundcore Life P2 Earbuds are designed with sweat resistance, making them suitable for sports and workouts. The ergonomic design also helps ensure a secure fit during physical activities.

Q: Are the Soundcore Life P2 Earbuds compatible with voice assistants like Siri or Google Assistant?

A: Yes, these earbuds are usually compatible with voice assistants like Siri on iOS devices and Google Assistant on Android devices. You can access the voice assistant by using the touch controls on the earbuds.

Q: How do I control the Soundcore Life P2 Earbuds?

A: The earbuds have touch controls that allow you to perform various actions, such as play/pause music, skip tracks, adjust volume, answer/end calls, and activate voice assistants. The specific touch gestures may vary depending on the model and firmware version, so it’s essential to refer to the user manual or Soundcore’s website for the most up-to-date instructions.

Q: Can I use one earbud at a time while leaving the other one charging in the case?

A: Yes, the Soundcore Life P2 Earbuds support independent use, so you can use one earbud at a time while keeping the other one charging in the case. This feature is useful for conserving battery life and maintaining a connection with your device.

For More Manuals by Soundcore, Visit the Latest Manual

Soundcore Life P2 Wireless Earbuds User Manual [pdf]

Leave a Reply